Beck TD, Part 31 - Indicators

In 1952, the MG TD left the factory with exactly two indicator lamps on the dashboard, one green (for gas level) and one red (a charging indicator for the electrical system). Back in Part 22, I detailed how I made a green indicator for the fuel level using some fancy LED indicators from Oznium. They look like this:

Beck TD, Part 30 - Unbending Beck

I am so grateful to my friends at Lancaster Mitsubishi for putting up with my crusty old MG. Even though they are obviously a new car dealer, they also have a large used car lot, and have factory trained techs on the German cars that were my projects for so long. Somehow, they are also willing to work on Beck, even though it barely fits on their equipment!

So far, Beck TD has been on both the alignment rack, and now, the frame machine. The results were stunning! The photo on the left is from Part 26 when I got a front end alignment, and it shows the severe hit that the front cross member had sustained some time in the distant past. That resulted in a serious caster misalignment that I suspected was the cause of the steering having poor self-centering performance. Sorry about the dangling wire - that is now attached to the new driving lights.

The photo on the right is the result after Dave in the body shop put the muscle on Beck with the frame machine. That is waaaay better, and the first drive, even without a realignment, tells me we're on the right track for the tracking, so to speak.

St. John's Pulpit

My good friend, Father Glenn Miller, is currently serving at St. John's Episcopal Church in Lancaster. He came to me recently with an interesting problem concerning the church's historic pulpit:

While a stunning example of the woodworker's art, the desk of the pulpit was stuck in a previous century - it was too small to hold an 8-1/2 x 11" sheet of paper:

Beck TD, Part 29 - Hold My Bonnet, Please

Yes, of course, everyone reading this blog knows I'm not talking about a hat when I say, "bonnet." That's the British term for what we Yanks call the "hood," the part over the engine. At least in the old days, in Britain the "hood" was the convertible top. That makes sense, with its analogy to a hood on a jacket.

When I bought Beck, it was only running the top of the bonnet, with the sides open. To keep things from flying away, there was a leather strap - a traditional British way of doing:

Beck TD, Part 28 - Random Fabrications

It occurs to me that the title might sound like I'm wandering around telling lies, but it's not that type of fabrication! Just about my favorite workshop activity is fabricating small parts that make Beck TD better. Since this blog is also my work log, here are four recent such fabrications.